Shenzhen Cowon Technology Co.Ltd.

Blog

 >  News >  Blog

How to Choose an ESL Battery for Digital Price Tags: CR2450 Configurations, Terminals, and Compatibility

Time : 2026-11-16

Quick answer. Before ordering a battery for an electronic shelf label (ESL), confirm the exact label model, original battery marking, cell chemistry, pack voltage, dimensions, polarity, and terminal or connector layout. A CR2450 or CR2477 marking is only a starting point. It does not confirm that the complete battery pack will fit or work in your digital price tag.

Electronic shelf labels can use a single coin cell or a multi-cell battery pack. Even labels from the same brand may have different battery configurations across models, display sizes, or hardware revisions. This guide explains what to check before requesting a quotation or approving a sample.

Why the Battery Model Alone Is Not Enough

CR2450 and CR2477 are different coin-cell sizes. For example, Panasonic specifies a standard CR2450 with a maximum diameter of 24.5 mm and a maximum height of 5.0 mm. Its CR2477 is also 24.5 mm in diameter, but has a maximum height of 7.7 mm.

Panasonic lists nominal capacities of 620 mAh for its CR2450 and 1,000 mAh for its CR2477 under the manufacturer’s stated test conditions. These are examples from one cell manufacturer. Capacity, dimensions, and performance can vary by manufacturer, cell type, and test conditions.

The thicker CR2477 may not fit a label designed for CR2450. The terminal arrangement may also differ. Do not select a replacement based on capacity or diameter alone. Confirm the complete pack against the original battery, drawing, or sample.

ESL Battery Selection Starts with the Tag Design

CR2450 and CR2477 at a Glance

The following figures are Panasonic manufacturer examples for standard primary lithium coin cells without tabs. They are not universal specifications for every cell or assembled battery pack.

Cell Model Nominal Voltage Maximum Diameter Maximum Height Nominal Capacity
CR2450 3 V 24.5 mm 5.0 mm 620 mAh
CR2477 3 V 24.5 mm 7.7 mm 1,000 mAh

A battery pack can differ from the cell itself because of its terminals, wires, insulation, holder, or housing. Ask the supplier for the complete pack dimensions and rated specifications.

CR2450 Pack Configurations: What to Confirm

ESL battery designs may use one or more cells. The number of cells alone does not tell you the pack voltage or capacity. Those depend on the cell specification and how the cells are electrically connected.

When comparing a single-cell or multi-cell option, confirm:

  • Number of cells and electrical connection arrangement
  • Pack nominal voltage and rated capacity, with test conditions
  • Complete dimensions, including tabs, insulation, holder, or housing
  • Positive and negative contact positions
  • Whether the battery is primary and non-rechargeable, or rechargeable
  • Operating temperature and pulse-load requirements

CR-type primary lithium cells are non-rechargeable. If the original ESL battery is rechargeable or uses a different chemistry, a CR coin-cell pack is not automatically a suitable replacement. Verify the original design and charging requirements before choosing a battery.

Cowon’s CR2450 ESL product listing describes multiple cell-count options and customization for wires, connectors, welded tabs, clips, and fixing structures. The exact configuration should still be confirmed against the target label.

See Cowon’s CR2450 battery solutions for ESL and digital price tags and CR2477-1P ESL battery listing. Confirm the current drawing and specification for the exact option before ordering.

Terminals and Contacts: Small Differences Matter

Two batteries can look similar in a product photo but have different contacts. Check the number of terminals, their positions, tab direction, polarity, width, thickness, and bend. For wire-connected designs, also check cable length, connector type, pitch, locking direction, and pin assignment.

A connector housing that looks similar does not guarantee a matching pinout. Incorrect polarity or pin assignment may prevent operation or damage the ESL electronics. For soldered designs, confirm that the tab geometry matches the assembly and the approved battery design.

If the terminal layout is not documented, ask the supplier for a dimensioned drawing before approving the sample.

A Practical Compatibility Checklist

  1. Identify the ESL. Record the manufacturer, exact label model, display size, and hardware revision. Different models or generations from the same brand may use different battery arrangements.
  2. Photograph the original battery. Capture the complete battery marking, both sides, tabs or connector, and how it sits inside the label. If the battery has been removed, include a ruler or caliper reading of the available space.
  3. Confirm the electrical requirements. Ask for the chemistry, nominal voltage, capacity, cell arrangement, pulse behavior, and any charging requirements. Compare specifications measured under similar conditions.
  4. Check mechanical fit. Compare the complete pack dimensions, terminal height, insulation, clips, and clearance inside the enclosure.
  5. Test a sample in the actual ESL. Check startup, display updates, wireless communication, and physical fit under the conditions relevant to the product. A voltage reading on its own does not prove compatibility.

ESL Battery Compatibility Checklist

What to Send When Requesting a Quotation

A complete inquiry helps the supplier identify the battery configuration and prepare a more useful quotation. Include:

  • ESL brand and model, plus display size or hardware revision if known
  • Photos of the original battery and its installed position
  • Original battery markings, datasheet, or drawing
  • Sample quantity and estimated production quantity
  • Required voltage, capacity, dimensions, and terminal details, if specified
  • Destination country and shipping or compliance-document requirements

If some technical details are unknown, send clear photos and say which information is missing. Ask the supplier to compare the original sample and provide a drawing for approval if the pack shape or terminals are customized.

Rated capacity alone does not determine service life. Sleep current, wireless update activity, display behavior, pulse demand, ambient temperature, and the cell’s discharge conditions can all affect usable life. Ask whether the quoted capacity refers to the cell or the completed pack, and how it was measured. Avoid relying on a generic service-life estimate unless it reflects the actual ESL power profile and a stated test method.

For production programs, confirm lot traceability, incoming inspection criteria, packaging, and transport documentation. Keep the approved drawing and sample revision with the purchase specification so that later batches can be checked against the same reference.

From ESL Battery Sample to Production

Frequently Asked Questions

Can I Replace a CR2450 ESL Battery with a CR2477?

Only if the label design has enough space and the electrical and terminal requirements also match. Compare the complete pack drawing with the original battery and test the sample in the target label.

Does a 2P Pack Always Provide Twice the Voltage?

No. The cell count alone does not determine pack voltage. The electrical arrangement matters. Ask the supplier to confirm the pack configuration and nominal voltage from the drawing.

Can CR2450 Primary Cells Be Recharged?

No. CR-series primary lithium cells are non-rechargeable. Never charge a primary cell. If the ESL uses a rechargeable battery, confirm its chemistry and charging circuit before sourcing a replacement.

What If I Do Not Know the Connector Type?

Send clear photos of the original battery, connector, and circuit-board interface, along with the ESL model. Request a drawing and sample confirmation. Visual similarity alone is not enough to confirm fit or pinout.

What Should Be Approved Before Mass Production?

Approve the electrical specification, complete pack dimensions, polarity and contact drawing, fit in the ESL, sample performance, packaging, and revision control. Keep the approved sample or drawing as the reference for future orders.

Need Help Identifying an ESL Battery?

Send Cowon the ESL model, original battery markings, clear photos of the pack and connector, and your target quantity. The team can review the available options and confirm which details are needed for a quotation.

Browse Cowon’s CR2450 ESL battery solutions or CR2477-1P ESL battery listing.

Technical References

The Panasonic figures above are manufacturer examples. Confirm the actual cell manufacturer, pack configuration, drawing, and test conditions for the quoted product.

Tel

+86-18802670732

WhatsApp

+86-18802670732

Email

[email protected]

wechat whatsapp